Wednesday, November 21, 2012

Metalcloak Black Friday thru Cyber Monday Sale!

Hello Rock-Biting Jeepers!

First, let me say that I wish you and yours the Happiest of Thanksgivings and hope that you have much to be thankful for. By the way, I've always loved this story of Thanksgiving and thought I would share it with you. The Real Story of Thanksgiving as told by Rush

There is a lot we at Metalcloak have to be Thankful for each and every year --- and at the top of the list is you, our Customers, our Friends. Thanks to you, our growth in 2012 has been our best ever.
So we are saying Thank You in a BIG way! One more chance at FREE SHIPPING in 2012. 

From Black Friday through Cyber Monday, you have one last opportunity to get Free Shipping for any of our Game-Changing Metalcloak Body Armor or Suspension Systems

And if you've ever set-up a Metalcloak shopping cart, you know FREE SHIPPING can be upwards of 10% - 15% savings!

This is an ONLINE ONLY sale, so use the Coupon Code: freeshipturkey12

This will be your last opportunity in 2012 to get this kind of savings! SO DON'T MISS OUT!

This sale is good for ALL Metalcloak products (except extended corner guards) to the lower 48 states only and and there is NO minimum order.

LIMITED EDITION!
The new Jersey Style Long Sleeve Tee printed using the "discharge" method which eliminates the heavy inks and features the Metalcloak Hex-M on the front and Metalcloak in white on each sleeve.
Just in time for winter! Only $22.00 while supplies last. Order Yours Before They Run Out!
Metalcloak Long Sleeve Tee Shirt

PRODUCT HIGHLIGHT...
At Metalcloak we are never satisfied when we produce a product. Even when its a home-run release, we still listen and learn and make rev changes along the way.

We recently made some significant changes to the TJ/LJ Gas Tank Skid Plate. Originally released last year, the Ditomic (Aluminum + Steel) Armor product has been a hit among our customers, weighing only 48lbs compared to typical steel skid plates at 60 lbs, but the alumium portion was sometimes hard to install.

The solution? A NEW, IMPROVED, Gas Tank Skid Plate that has a new, redesigned, aluminum plating made of three parts.
Metalcloak Long Sleeve Tee Shirt
The Result? As one customer said, the new design "is so easy a child could put it together."
Same price. New design.
LEARN MORE!

PIC OF THE WEEK...
Our friend Will Gentile at HeavyMetal Concepts put together this graphic and it just seamed appropriate.
HeavyMetal Pic of the Week


See you on the rocks... or not!
Matson "Matsonian" Breakey
MetalCloak.com
916-631-8071

Thursday, November 15, 2012

A Primer on Winching, Part 2 [From Badlands Off-Road Adventures]



Following up on last month's article, A Primer on Winching, Part 1, we'll delve deeper into the winching process. As with the previous column, this information comes from my exclusive Winch Recovery Bandana, which you can purchase from the Badlands Off-Road Adventures web site.
Winch kit
All successful winching starts with a good winch kit. That kit should include a pair of sturdy, loose fitting leather gloves, a tree strap 15 to 16 feet long, a heavy blanket, four to six D-rings, and a piece of 70 grade 3/8" chain (10 feet is long enough). Let's look at each component.
Sturdy leather gloves are mandatory. Steel winch line develops small broken wires that will tear into your hands. Loose fitting gloves allow you to pull your hand out if the gloves become caught in the winch or line. A tree strap that is at least 15 feet long will be long enough to go around larger trees. This is done to protect the tree. A chain or cable will cut into the bark, mortally wounding the tree. Also, cable that's wrapped around a tree and hooked back on itself develops a kink, which weakens the cable. The blanket is used as a "parachute" and placed over the winch line during winching to dampen recoil should the winch line break.
The chain, by the way, needs to be sturdy. Chain strength is given in grades; the higher the number, the stronger the chain. The Working Load limit (WLL) of the chain needs to be in the same range as the rest of your gear. Using higher grade chain (like grade 70) allows appropriate strength in a smaller link size which is easier to store and manage. Chain found at hardware stores is typically around a 43 grade. You will need quite a large link size at that grade. Go with 70 grade (or higher if you can afford it). Higher grade chains have each link welded for extra strength. Finally, having four to six D-rings puts more options at your disposal, especially for complicated winching.
What is working load limit?
I want to stress one thing: Never use equipment whose rating – either working load limit (WLL) or breaking limit – you don't know. If that information is not on the item, do not use the part. You could put yourself and everyone else in danger.
Working load limit, previously called safe working limit, is just what it means: the maximum stress that the item is designed to handle while in use. For safety reasons, the WLL of winching components is about one-fifth of the item's breaking strength. Let's look at some examples. The WLL for grade 70 3/8" chain is 6,600 lbs. D-rings should have a minimum of 3/4" pin. That size has a WLL of 9,500 lbs. You can find the WLL for other sizes of parts on my winching bandana.
After purchasing the parts, if the WLL is only indicated on the package it comes in, make sure you transfer the WLL onto the part permanently. A permanent marker (magic marker or Sharpie) works great on tree straps, whose packaging you pitch after opening. For pulleys and D-rings, carve the information with an engraving pen into the metal. Original sticky labels and markings tend to wear off over time.
Also, never use a recovery strap for winching. Recovery straps are designed to stretch. That stretching builds energy, which is used to snatch a stuck vehicle free. A jerking action while winching is dangerous because of all the metal parts used. A recovery strap adds additional recoil to the winch rigging which is not desirable. If that strap were to break, you'd have a bunch of steel missiles flying around. (For more information on risks of using a recovery strap, see "Don't Lose Your Head While Recovering a Vehicle." ) For winching, we want a nice, steady pull.
Winching starts with a vehicle recovery plan
A winching operation is serious business and should be treated as such. Take your time to think it through before proceeding. The following steps are outlined under the Vehicle Recovery Plan section of the bandana.
Make sure everyone in the affected vehicle is safe, especially if the vehicle rolled over. Be prepared to provide first aid, but also make sure the vehicle itself is stable. If not, you may need to attach straps or cables first. Also, look for any hazards that could endanger the recovery crew.
Be careful if the vehicle is perched on its side. You don't want it dropping on top of you while you're attaching the cable.
A vehicle recovery plan is essential. Gather everyone together. Get their input, and determine the best course of action. Don't let anyone start rigging up until you've decided what to do. If need be, appoint a leader. Have someone (that could be you) take charge of the situation. The winching should be done in an orderly manner.
Inspect the vehicle. Are there any broken of dangling parts that could affect the recovery? What about leaking liquids? Do something to capture those until you can devote time to the environmental issues and clean up.
Determine your exit path, and get a lay of the land. See if there are any obstacles you'll need to overcome. What is the best direction to go? It's always easier to go downhill, but you may find that pulling a few feet up and over a hill or obstacle makes more sense.
If the vehicle is on a slope, set the emergency brake. You don't want the vehicle rolling downhill once it's freed up.
Plan the rigging. Estimate your stuck load, and calculate whether you have the capability to handle the load. (See the sidebar for more information.) Pulleys add friction, so remember to add 10% to the load for each pulley used.
But pulleys also aid in pulling. A full discussion is beyond the scope of this article. Just remember that when you use one "moving" pulley, the winch "sees" only one-half of the total load. (Only one-third, if two "moving" pulleys are used.) The total load may be 10,000 lbs. but the winch needs to pull only 5,500 lbs. (10,000 plus 10% for the pulley divided by 2).
Last step
Set up the rigging and double check it. Take up the slack and re-inspect for correct assembly. Proceed with the recovery.
This may seem like a lot of steps—especially when you're following off the bandana—but after doing a couple; it's easy to pick up the fundamentals of winching. For additional, hands-on training, sign up for one of my winching courses.
Warning – this article is not a substitute for proper training and use of quality equipment that is used within the bounds of their safe working load. We advise you to use this information at your own risk. We cannot control the quality and specifications of the equipment used and the methods actually employed.
A number of variables go into estimating the stuck load:
Stuck factors are:
  • Weight of the vehicle and its contents (aka Gross Vehicle Weight –GVW)
  • Type of material it's stuck in and how deep
  • Slope to be pulled up or down
Ground Conditions Resistance
For only shallowly stuck (i.e. no traction) here are the numbers for various types of ground. Don't try to memorize them all. Assume 70% for mud and 35% for any other type of ground. Those numbers will get you close enough in your calculations in the field.
% OF GVW
  • Pavement/ Hard Surface 2-4%
  • Grass 8-14%
  • Wet sand 15-20%
  • Gravel 10-20%
  • Soft, Dry sand 25-35%
  • Light, shallow mud 30-35%
  • Heavy, deep mud 40-60%
  • Deep Clay Mud 50-70%
Depth Resistance
(overrides ground condition – use this instead of the shallowly stuck numbers above.)
  • Up to axles 100% of GVW
  • Top of the tires 200% of GVW
  • Hood / Body 300% of GVW
Slope Resistance
(Gravity has to be taken into account. It adds to the load if uphill pull)
Slope in degrees divided by 60 times the vehicle's weight up to a 60-degree slope. For a more severe angle, use 100% of vehicle weight.

Let's say the vehicle is on a 30-degree slope: 30 degrees / 60 = 50% x 5,000 GVW = 2,500 lbs.
Finally Calculation
Add ground conditions resistance (or depth resistance) to slope resistance for load estimate.

I hope to see you on the trails!
Tom Severin, President
Badlands Off Road Adventures, Inc.
4-Wheel Drive School
310-374-8047
http://www.4x4training.com
Make it Fun. Keep it Safe.
#####
If you find this information valuable, please pass it on to a friend. You can forward them the email. If you received a forwarded copy of this newsletter and would like to subscribe for yourself, go to: www.4x4training.com/contacts.html and follow the instructions to join our mail list.
Want To Use This Article In Your Magazine, E-Zine, Club Newsletter Or Web Site? You are welcome to use it anytime, just be sure to include the following author/copyright information: Tom Severin, 4x4 Coach, teaches 4WD owners how to confidently and safely use their vehicles to the fullest extent in difficult terrain and adverse driving conditions. Visit www.4x4training.com to develop or improve your driving skill.
Copyright 2012, Badlands Off-Road Adventures, Inc.